DCP-7030 DCP-7040 Before you can use the machine, you must set up the hardware and install the driver. Please read this ‘Quick Setup Guide’ for proper set up and installation instructions. STEP 1 Setting Up the Machine STEP 2 Installing the Driver & Software Setup is Complete! Keep this ‘Quick Setup Guide’...
Symbols used in this guide Caution Improper Setup Warning Warnings tell you what to do to prevent Cautions specify procedures you must Improper Setup icons alert you to possible personal injury. follow or avoid to prevent possible devices and operations that are not damage to the machine or other objects.
Table of Contents Getting Started Carton components............................2 Control panel..............................4 STEP 1 – Setting Up the Machine Installing the drum unit and toner cartridge assembly.................. 5 Loading paper in the paper tray ........................6 Install the power cord and phone line ......................7 Setting the LCD contrast ..........................
Getting Started Carton components Carton components may vary from one country to another. Save all packing materials and the carton in case for any reason you must ship your machine. Warning Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep these bags away from babies and children.
Getting Started Australia & New Zealand users: Hong Kong, Malaysia & Singapore users: The mains pulg supplied with this machine is a grounded three pin pulg. Make sure that the AC socket will accept this grounded three pin pulg. This machine must be grounded, If in doubt, call a qualified electrician. Philippines &...
Getting Started Control panel DCP-7030 and DCP-7040 have the same keys. 1 Job Cancel 5 Menu keys 2 Scan key 6 Start keys 3 Copy keys 7 Stop/Exit key 4 LCD (Liquid Crystal Display) For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.
Setting Up the Machine Put the drum unit and toner cartridge assembly Installing the drum unit and into the machine. toner cartridge assembly Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done when installing the driver. Open the front cover.
STEP 1 Setting Up the Machine Fan the stack of paper well to avoid paper jams Loading paper in the paper and misfeeds. tray Pull the paper tray completely out of the machine. Put paper in the paper tray. Make sure that the paper is flat in the tray and below the maximum paper mark (1).
Setting Up the Machine Install the power cord and Setting the LCD contrast phone line You can change the contrast to help the LCD look lighter or darker. Make sure that the machine’s power switch is off. Connect the AC power cord to the machine. Press Menu and to select 1.General Setup.
The Software User’s Guide includes instructions for features available when connected to Brother Solutions Center a computer. (eg. printing and scanning details) Access the Brother Solutions Center for FAQs, User’s On-Line Registration Guide, driver updates and tips for using your machine. (Internet access required) Register your machine from the Brother Product Registration Page.
Follow the instructions on this page for your operating system and interface. For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solution Center directly from the CD-ROM / Driver or visit http://solutions.brother.com/.
® • If this window does not appear, use Windows MFL-Pro Suite. Explorer to run the start.exe program from the root folder of the Brother CD-ROM. Turn off and unplug the machine from the AC ® • For Windows Vista...
Plug the AC power cord into an AC outlet. Turn the power switch on. The installation of the Brother drivers will automatically start. The installation screens appear one after another, please wait for a while.
XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/. • After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown.
Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software. The Brother software will search for the Brother device. During this time the following screen will appear.
Note ® ® When Presto! PageManager is installed OCR capability is added to the Brother ControlCenter2. You can also easily scan, share and organize ® photos and documents using Presto! ® PageManager Choose your model name, and then click Add.
Consumables and Options Consumables When the time comes to replace consumable items, an error message will be indicated on the LCD. For more information about the consumables for your machine, visit us at http://solutions.brother.com/ or contact your local Brother reseller. Toner Cartridge...
The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.