Part Identification Chart - WeiderPro 30963.0 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the parts bag, check to see if it has been preattached. If a
part is missing, call the number located on the front cover of this manual.
M6 Nylon
Locknut (107)
Locknut (78)
M8 Washer (103)
M4 x 12mm
M4 x 16mm
Self-tapping
Self-tapping
Screw (102)
Screw (110)
M10 x 70mm Bolt (113)
M8 Nylon
M10 Nylon
Locknut (77)
M10 Washer (80)
M6 x 16mm
Screw (88)
M12 Nut (112)
M10 Large Washer (105)
M8 x 22mm
Shoulder Bolt (90)
M10 x 75mm Button Screw (118)
5
M4 Washer
M6 Washer
(104)
(114)
M12 Large Washer (98)
M10 x 20mm
Button Screw (96)