WeiderPro 30963.0 User Manual page 21

37. Wrap the Leg Lever Cable (51) under a 90mm
Pulley (48). Attach the Pulley to the Right Press
Arm (16) with an M10 x 50mm Bolt (97), two Half
Guards (55), a Cable Trap (56), an M10 Washer
(80), and an M10 Nylon Locknut (77). Make sure
that the Cable Trap and Half Guards are orient-
ed as shown.
38. Wrap the Leg Lever Cable (51) around a "V"-pul-
ley (47). Attach the Pulley to the Upright (2) with
an M10 x 70mm Bolt (113), two Half Guards (55),
an M10 Washer (80), a Long Cable Trap (57), and
an M10 Nylon Locknut (77). Make sure that the
Cable Trap and Half Guards are oriented as
shown.
39. Wrap the Leg Lever Cable (51) around a 90mm
Pulley (48). Attach the Pulley to the Left Press
Arm (15) with an M10 x 50mm Bolt (97), two Half
Guards (55), an M10 Washer (80), and a Cable
Trap (56). Make sure that the Cable Trap and
Half Guards are oriented as shown.
37
77
48
38
39
21
55
51
80
55
97
56
16
2
55
57
77
47
80
55
51
113
97
51
48
55
80
56
55 77
15