M6 X 60Mm Button - WeiderPro 30963.0 User Manual

40. Attach the Leg Lever Cable (51) to the Upright (2)
with the M10 x 120mm Bbolt (115), an M10
Washer (80), a 7mm Spacer (111), and an M10
Nylon Locknut (77). Make sure that the flat edge
of the Cable is against the Spacer.
Seat Assembly
41. Attach the Right Butterfly Pad (35) to the Right
Butterfly Arm (26) with two M6 x 60mm Button
Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad (34).
42. Attach the Backrest (31) to the Backrest Frame
(7) with two M6 x 16mm Screws (88), an M6 x
32mm Screw (89), and an M6 Washer (114).
Insert the Backrest Frame (7) into the Upright (2)
and tighten the Backrest Adjustment Knob (53)
into the Upright. Make sure that the Adjustment
Knob passes through one of the holes in the
Backrest Frame.
40
41
26
114
91
42
31
22
Flat Edge
2
115
80
111
51
77
35
34
88
7
2
53
89
114