Setup For Macintosh - Axis 560 User Manual

High performance multi-protocol print servers for virtually all networks

Hide thumbs Also See for 560:

Table of Contents

AXIS 560/660 User's Guide

Setup for Macintosh

Note:

Only AXIS 560 supports printing in the Macintosh environment.

Follow the instructions below to choose a printer:

1. Open the Chooser from the Apple menu.

2. Click the LaserWriter, alternatively the LaserWriter 8.0 Icon.

3. If your network has more than one zone, click the name of the default zone. If

your network has no zones, this box does not appear.

4. Click the name of the printer you want to use. The default printer name is shown

as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last six digits of the

serial number, and <port> is LPT1, LPT2, or COM1 respectively.

5. For LaserWriter 8.0 printer driver only:

Click Setup..., and then Select Auto Setup. If the printer, as well as the print

server, supports bi-directional printing the installation will be automatically per-

formed. If not, you will be prompted to select a PPD file matching your printer.

Click OK.

6. Click the Close box. This completes the configuration.

Repeat this procedure for each Macintosh using the AXIS 560/660.

Setup for Macintosh

Table of Contents

660