Configuring Using Ftp - Axis 700 User Manual

AXIS 700 User's Manual

Configuring using FTP

Caution!
Caution!
Notes:
The AXIS 700 configuration file includes all the system parameter
settings regarding network protocols, profiles, paper sizes and
destinations.
Follow these instructions to edit the configuration file using FTP:
o Windows 95/98 has a directory called 'config' that contains
important system files. It is important to change to another
directory using the
configuration file from within a Windows 95/98 environment.
Failure to do this may result in some of your system files to be
overwritten.
1. In a DOS or UNIX window, type
is the name or IP address of your AXIS 700.
<IP address>
2. Login using the user id
one you have set).
3. Type
get config.ini
your current directory.
4. Edit the file using your preferred text editor. In Windows 95/98
and Windows NT environments, you can for example use
Notepad.
o Do not use MS Word or similar word processor.
5. Type
put config.ini
save it permanently.
6. To exit FTP, type the command
o The configuration file can be used as a template when configuring
multiple Network Scan Servers.
o It is sufficient to download the configuration parameters that have
changed. The other parameter settings will remain unchanged.
o Internet-related parameter settings cannot be changed using FTP.
Section 3: Configuring the AXIS 700
command before modifying your AXIS 700
cd
ftp <IP address>
and the password
root
to download the configuration file to
to download the file to the AXIS 700 and
,
quit bye
, where
(or the new
pass
, or .
exit
51