Factory Default Settings - NETGEAR CGD24G User Manual

Wireless Cable Modem Gateway CGD24G User Manual
Table A-1. Technical Specifications (continued)
Specification
Wireless
Radio data rates
Frequency
Operating frequency ranges
Encryption

Factory Default Settings

You can use the reset button located on the rear panel of your Product Family to reset all settings to
their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset
button for 5 seconds. The gateway reboots and returns to the settings shown in the following table.
Table A-2. Default Configuration Settings
Feature
Gateway Login
User login URL
User names and passwords (case
sensitive)
Local Network (LAN)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall
Inbound communication from the Internet Disabled (except traffic on port 80, the http port)
Outbound communication to the Internet Enabled (all)
Source MAC filtering
A-2
Description
1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing
2.4-2.5 GHz
2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Default Behavior
http://192.168.1.1
• mso/changme
• admin/password
192.168.0.1
255.255.255.0
Enabled
192.168.0.10
192.168.0.19
Disabled
Technical Specifications and Factory Default Settings
v1.1, May 2009