Wireless Cable Modem Gateway CGD24G User Manual
How to Configure Wireless Security for a Wireless Guest Network
Note: To restore all guest network settings, including the wireless security settings, to
their default settings, click Restore Guest Network Settings.
After you have completed
step 5
in the previous section, the screen expands and the security
options for the guest network display.
Figure 2-9
Wireless security is disabled by default. NETGEAR strongly recommends that you implement
wireless security for the guest network.
To configure wireless security for the guest network that you selected, enter the security options,
and then click Apply to save your changes. This process is very similar to configuring wireless
security for the gateway. For more information, see
"Configuring WEP (Wired Equivalent
Privacy) Wireless Security" on page 2-6
and
"Configuring WPA or WPA2 Wireless Security" on
page
2-8.
Wireless Configuration
2-17
v1.1, May 2009