NETGEAR CGD24G User Manual page 62

Wireless Cable Modem Gateway CGD24G User Manual
Figure 4-6
3. Under Ping Test Parameters, enter the following settings:
• Ping Target. Enter the IP address of the computer that you would like to ping.
• Ping Size. Enter the size of the ping packet.
• No. of Pings. Enter the number of times you would like to ping the computer.
• Ping Interval. Enter the time you would like to wait between the pings.
4. Click Start Test.To stop the test while in progress, click Abort Test.
5. To see the results of the ping test, click REFRESH. To clear the test results after the test has
completed, click Clear Test.
4-8
v1.0, November 2008
Managing Your Network