Advertisement
MFL_251 270 819 A_LASER PRO 341 GB.book Page 13 Mercredi, 23. avril 2003 2:55 14
Maintenance
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:
A
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Caution -
Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit
has cooled before cleaning the interior of the printer.
Clean the outside of the printer with a smooth duster.
Date en cours : 23 avril 2003
\\Sct31nt3\BE31-DOC\DOC
31
-
GB_EXPORT\Maintenance Gb.fm
B
6-13
En
cours\Travaux
en
cours\MFL-MFC-MFK\MFL_251
+
Open the scanner cover by
pressing the release button (A)
+
Clean the transparent scanning
glass (B) with a soft lint-free
cloth soaked with alcohol
+
Close the scanning cover
+
Make a copy in order to ensure
that the symptoms are gone
270
819
A_LASER
PRO
341
Advertisement
