Device Design - Aztech Easy Start Manual

All manuals and user guides at all-guides.com

Device Design

The HomePlug Wireless Adaptor has four LEDs and an Ethernet port.
Power
HomePlug
Wireless
Ethernet
Icon Icon Icon Icon Name Name Name Name
Power
HomePlug
Wireless
Ethernet
To reset the HomePlug Wireless Adapter to default settings, press
RESET for 10 seconds. The Ethernet Port RESET RESET RESET
straight Ethernet cable
LED Status LED Status LED Status LED Status Description Description Description Description
On/Off Power is on/off
On/Off Another HomePlug is detected/not detected
Flicker Sending/receiving data with another HomePlug
On/Off Access point is enabled/disabled
Flash Sending/receiving data wirelessly
On/Off Ethernet is connected/not connected
Flicker Sending/receiving data through Ethernet
Ethernet Port accepts either cross or Ethernet Port Ethernet Port
to connect with another Ethernet device.
Easy Start Guide
Page 5 of 14