Dish Network Hopper User Manual page 86

Chapter 10
Controlling Other Components
Controlling a Tuner or Amplifier
Use the following remote control buttons to control a tuner or amplifier. When the remote
control is set up as described on pages 71 and 78, press the AUX device mode button to
set the remote to AUX mode. The AUX mode button will stay lit for two seconds to show
you've set the remote to AUX mode. Make sure to keep the remote in AUX mode to use
the following buttons.
Switching Between TV and Tuner/Amplifier Volume
Adjustment
When the remote control is set up to operate your TV, the VOLUME and MUTE buttons
will adjust your TV volume by default. If you prefer the volume and mute functions of the
remote control to adjust the volume of a remote-controllable tuner/preamp, audio receiver
or amplifier device instead of the TV, this capability can be set up using AUX mode of the
remote control.
To set the remote to adjust the tuner/preamp or audio amplifier volume (steps 1-5 set up
the remote control and steps 6-7 verify that the remote has been set up correctly):
78
To use the features described in this section, make sure
you are in AUX mode by pressing the AUX Mode button.
Power
Turns the
tuner/amplifier
on and off
Volume & Mute Buttons
Control tuner/amplifier
volume
AUX Mode
Press this
button for
AUX Mode
Select/Arrows
Button
Channel up/down
with the Arrow buttons.
Change tuner/amplifier
inputs with the Select
button
AUX