Dish Network Hopper User Manual page 83

2
Press the POUND (#) button twice.
Watch the mode light to determine your
code. The mode button flashes the
number for each digit of the device
code, with a pause between the groups
of flashes. A quick flash is for zero (0).
For AUX mode: The first group of
flashes indicates what the AUX mode
controls. A quick flash (zero) before the
three-digit code is for a TV, one regular
flash is for a VCR, and two flashes is
for an audio tuner or amplifier.
For a satellite receiver programmed in
AUX mode: The AUX device mode
button will flash the same number of
times as the remote address number.
For Limited Mode: If you have
programmed a TV (or VCR) in Limited
Mode, the device mode button flashes
once at the end of the flash sequence.
Remote Controls
Controlling Other Components
For example, if the code is 570, the mode
button flashes five times, pauses briefly,
flashes seven times, pauses again, and flashes
once very quickly.
For example, if the TV code is 570, the AUX
mode button flashes once very quickly
(indicating 0 for TV), pauses briefly, flashes five
times, pauses again, flashes seven times,
pauses once more, and flashes once quickly.
For example, if the receiver address is 3, the
AUX mode button flashes three times.
For example, if the TV code is 570, the AUX
mode button flashes once very quickly
(indicating 0 for TV), pauses briefly, flashes five
times, pauses again, flashes seven times,
pauses once more, flashes once quickly, and
then flashes once normally (indicating the TV
device is in Limited Mode).
75