Changing Or Deleting A Timer - Dish Network Hopper User Manual

4
Enter your search criteria. You can use the virtual on-screen keyboard below the text box,
or you can use the letters above the NUMBER PAD buttons on the remote control (similar
to texting on many mobile phones) while the on-screen cursor is in the text box. See Using
Text Fields on page 19 for instructions.
5
Select any Options for the Seek & Record timers, as described on page 61, if applicable.
6
Select Create. When the receiver has completed your search, the Timers list and Daily
Schedule screens will display the results.
Note: After entering your search words and selecting Create, be sure to review the timers
the Seek & Record feature created—some may not be what you are expecting. You can:
• Choose any selected events you want to Skip. Review timers for future events often
by pressing the DVR button three times to access the Daily Schedule screen.
• Adjust your search terms and/or method. Select Priority to change the priority of your
Seek & Record timers. To adjust your search further, delete any unwanted Seek &
Record timer(s) and try the following:
— Change your Seek & Record search term(s) to be more specific.
— If you press the SEARCH button when you have highlighted a future program
within the Program Guide, Browse Banner, Themes list or Search results, then the
program's exact title will be entered in the text box for you.
C D
HANGING OR
1
Press the DVR button three times for the Daily Schedule or four times for the Timers list.
2
Highlight a program or event in the list and press the SELECT button.
3
Select Skip Event if you wish to skip the selected occurrence of the event timer; Edit
Event. if you wish to change recording options for this occurrence only; or Edit Timer if
you wish to change or delete all occurrences of this timer from the list.
4
Select Delete. A pop-up window asks you to confirm your choice(s).
5
Select Yes on the pop-up screen. The timer(s) you selected are now deleted.
T
IPS
• Make sure the Updates feature is enabled, as described on page 91. By enabling this
feature, the Electronic Program Guide (EPG) always will have the most up-to-date
information, and your DVR can automatically adjust or create timers accordingly.
• Weekly, Daily, and Monday-Friday timers move only if the program is within one hour
earlier or four hours later than the original time for which the timer was set. These
timer frequencies will adjust their length if their event's time block is extended.
T
ELETING A IMER
Record Future Programs

Changing or Deleting a Timer

65