Dish Network Hopper User Manual page 80

Chapter 10
Controlling Other Components
VCR (using the mode button for a DVD or AUX device) in Limited Mode, you will only be
able to use the POWER and VCR-function buttons (like PLAY, PAUSE, etc.).
Turning Limited Mode On and Off
To turn off Limited Mode so that you can use all of the buttons on your DISH remote to
control your TV or disc player, do the following:
1
Press MENU, highlight and select the Settings tile, and then Remote Manager.
2
Highlight and select the option for Limited Mode:
• Select Enabled to turn Limited Mode on. This is the default.
• Select Disabled to turn Limited Mode off. Now buttons function in TV and DVD modes.
3
Highlight and select Save when you are finished.
Note: Limited Mode is not used if an audio amplifier is programmed on the AUX button.
Combination Devices
If you are programming the remote to control a combination device, such as a TV/VCR or
a TV/DVD, program the remote control in one mode (TV), and then repeat the procedure
in the other mode. For example, to program the remote to control a TV/VCR combo device
using codes 622 and 815, follow the instructions to program the remote in TV mode using
TV code 622, and then repeat the instructions to program in DVD mode to control the VCR
using code 815. When Limited Mode is enabled, use POWER and VCR-function buttons.
Setting Up Using Device Code Tables
Set up the remote to control other devices using the codes listed in the Remote Manager.
In the instructions below, the column on the left contains basic procedures to perform and
the column on the right provides any additional information, if applicable.
1
Turn the device on.
2
Find the brand name of the device in the
tables in Remote Manager.
3
Press and hold the mode button until all the
other mode buttons light up, then release
the button. The mode button flashes.
4
AUX
For
a VCR, or 2 for a tuner or amplifier.
72
Instructions
mode only. Press 0 for a TV, 1 for
Additional Information
Use the device's front panel buttons or its own
remote control.
If the brand isn't listed, see Setting Up Using Device
Codes Scan on page 73.
For example, for a TV, press and hold the
button until all of the other mode buttons light. When
you let go of it, the TV mode button will flash.
If you're not programming in
step 5.
TV
mode
AUX
mode, skip to