Using Picture -I N -Picture (Hopper Only ); Using Multi - Channel Recall - Dish Network Hopper User Manual

Chapter 3
Using Picture-In-Picture (Hopper only)
system. Each TV's Search History is available using that receiver's remote. You can use
Search History to re-search programming instead of typing the information again.
Press the Search button, access the drop-down list on the menu bar and select the History
item to see a list of your recent searches. Highlight one of the listed searches and press
the Select button to repeat it. Searches done on different days will often yield new results.
U P
SING ICTURE
The Picture-In-Picture (PIP) feature of the Hopper lets you watch two programs at once on
your nearby TV screen. The following instructions describe how to use the PIP feature.
1
Press the PIP button on your Hopper remote control to access the feature. By default, a
small window showing the programming from a second Hopper tuner will be displayed.
PIP Controls also will be displayed across the bottom of the screen on your nearby TV.
2
You can use the on-screen controls to reposition or resize the PIP window, Swap the
images in the main and PIP windows, or display them side by side on your TV screen. You
can also choose to Close the PIP window, or select X to cancel out of the PIP Controls. If
you have closed/canceled, you can display the on-screen controls again at any time by
pressing the PIP button.
3
Note that the POSITION and SWAP buttons on your Hopper remote perform the same
functions as the on-screen PIP Controls for these two functions.
U M
SING ULTI
Another helpful feature to find the program you want to watch is channel RECALL. You
can quickly go back to a channel you were previously watching on your TV. Both your
Hopper HD DVR and each Joey Receiver support the multi-channel recall feature,
allowing easy access to the four most recent satellite channels you viewed on your TV.
To enable, change, or disable the multi-channel recall feature, do the following:
1
Press the MENU button on your remote control and select the Settings tile.
2
Select Guide Settings, and then Format Guide.
3
Under Multi-Channel Recall, select one of the following options:
• On. This is the default setting. Pressing the RECALL button on your remote allows
you to select one of the four most recent channels you viewed on this receiver.
• On, immediate. Choose this setting if you want the RECALL button to change
immediately to the previous channel you viewed, but also display all four most recent
26
-I -P
N ICTURE
- R
CHANNEL ECALL
(H
OPPER ONLY
)