Miele Oven Operating And Installation Instructions page 134

Problem solving guide
Problem
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
The message "Fault with
moisture control - the
automatic programmes
will operate without
moisture" appears in the
display after selecting
an Automatic
programme.
After selecting the
Moisture plus
function "Fault with
moisture control -
Moisture plus
programme not
available" appears in
the display.
Programmes using
moisture will not take in
water.
A noise can be heard
after a cooking process.
134
Possible cause and remedy
The steam injection system is faulty.
^ Call the Miele Service Department.
The steam injection system is faulty.
^ Call the Miele Service Department.
Automatic programmes can be run without using
moisture.
The steam injection system is faulty.
^ Call the Miele Service Department.
^ Use the Fan plus
plus function.
^ Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").
The oven can be used in demo mode but the pump for
the steam injection system will not work.
^ Deactivate demo mode.
The fan remains switched on after a cooking
programme (see "Settings - Cooling fan run-on").
function instead of the Moisture