Miele Oven Operating And Installation Instructions page 132

Problem solving guide
Problem
The oven does not heat
up.
"Power cut - Process
cancelled" appears in
the display.
12:00 appears in the
display.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
" Fault XX" appears in
the display.
132
Possible cause and remedy
^ Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").
If demo mode has been switched on the oven can be
operated but it will not heat up.
^ Deactivate demo mode.
There has been a power cut which has caused a
current process to stop.
^ Switch the oven off and then back on again.
Start the cooking programme again.
The power supply was interrupted for longer than 200
hours.
^ Reset the time and date.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Select "OK". Touch
The oven will then be ready for use again.
There is a problem that you cannot resolve.
^ Call the Miele Service Department.
to delete "Process finished".