Icom IC-M412 Instruction Manual page 34

6
DSC OPERATION
n Transmitting DSC calls
D Transmitting a Group call (Continued)
About Manual Inputting:
Push [Y] or [Z] to input the 8-digit Group ID, then push
[ENT].
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the entry.
• The first one digit is specified '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
• Go to the next step after pushing [ENT].
Push
/
r Push [Y] or [Z] to select a desired intership channel, then
push [ENT].
• Intership channels are already preset into the transceiver in rec-
ommending order.
• After pushing [ENT], Channel 70 is automatically selected and
"READY" appears in the channel comment display.
Push
26
t Push [ENT] to transmit the Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
Transmitting
y After the Group call has been transmitted, the specified
channel (in step r) is automatically selected.
u Hold down [PTT] to announce your message to the speci-
fied group ships.
Scrolls