Icom IC-M412 Instruction Manual page 30

6
DSC OPERATION
n Transmitting DSC calls
D Transmitting an Individual call (Continued)
e Push [Y] or [Z] to select a desired pre-programmed Indi-
vidual address or "MANUAL INPUT," then push [ENT].
• The ID code for the individual can be set in advance. (p. 14)
• When "MANUAL INPUT" is selected, set the 9-digit MMSI ID
code for the individual you wish to call with [Y] or [Z]. (See
About Manual Inputting at the right column.)
About Manual Inputting:
Push [Y] or [Z] to input the 9-digit Individual ID, then
push [ENT].
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the entry, if desired.
• Go to the next step after pushing [ENT].
Push
/
22
r Push [Y] or [Z] to select a desired intership channel, then
push [ENT].
• Intership channels are already preset into the transceiver in pre-
ferred order.
• After pushing [ENT], Channel 70 is automatically selected and
"READY" appears in the channel comment display.
Push
Scrolls
t Push [ENT] to transmit the Individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
Transmitting