Dsc Address Id - Icom IC-M412 Instruction Manual

6
DSC OPERATION
n DSC address ID
A total of 100 9-digit DSC address IDs can be programmed
and named with up to 10 characters.
D Programming Address ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "ADDRESS," then push [ENT].
e Push [Y] or [Z] to select "ADD INDV ID," then push [ENT].
r Push [Y] or [Z] to set the 9-digit Individual ID, then push
[ENT].
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the programming mode, if desired.
14
t Push [Y] or [Z] to set up to a 10-character ID name.
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the programming mode, if de-
sired.
y Push [ENT] to program and return to normal operation.
Scrolls