Table of Contents
Advertisement
3-16. SPECIAL PROGRAM
MODE (Continued)
3-33
Product Buttons (Sp-9)
This mode allows you set up the way products are selected,
and Cook Cycles started, in the cook mode.
a. Follow steps 1 and 2 above.
b.Press and release
"PRODUCT BUTTONS" flashes in the display.
c. When using the first option, "1,COOK", pressing a
product button displays that product and starts the Cook
Cycle. When nothing is cooking, no product displays.
d. Press
. to show the second option. If using
"2,SELECT", pressing a product button displays the
product only. Press
Clean-Out Temperature (Sp-10)
This allows you to set the number of minutes of the Clean-Out
Mode.
a. Follow steps 1 and 2 above.
b. Press
until "SP-10" and "CLEAN-OUT
MINUTES" shows in display, along with the preset minutes.
c. Press
to change the number of minutes, up to 99.
Clean-Out Temperature (Sp-11)
This allows you to set the temperature of the Clean-Out Mode.
a. Follow steps 1 and 2 above.
b. Press
until "SP-11" and "CLEAN-OUT
TNP" shows in display, along with the set temperature.
c. Press
to change the temperature, up to
212ºF (100ºC).
Nominal Amps Reading (SP-12)-not used on model 291
"SP-12", "AMPS RDG, NOMINAL" should show on the
left side of display, and "OFF" on the right side.
Amps Reading Low Limit (SP-13)-not used on model 291
"SP-13" and "AMPS RDG, LOW LIMIT" should show on the
left side of display, and "OFF" on the right side.
Amps Reading High Limit (SP-14)-not used on model 291
"SP-14" and "AMPS RDG, HIGH LIMIT" should show on the
left side of display, and "OFF" on the right side.
Model OFE- 291
until "SP-9" and
to start the Cook Cycle.
403
Advertisement
Table of Contents
