Table of Contents
Advertisement
3-16. SPECIAL PROGRAM
MODE (Continued)
.
1005
SCHEDULE
m. If "4,SCHED" is selected, "SP-8A" shows in the display, and
followed by "SCHEDULE". Press the
to 4 different times of day can be programmed, by pressing
.
EX:
SP-8A "SCHEDULE"
SP-8B "SCHEDULE"
SP-8C "SCHEDULE"
SP-8D "SCHEDULE"
Unneeded times should be left at "- - - -", otherwise,
"Filter Suggested" shows in the display, prompting the
operator to start filtering.
Cooking is still permitted during the "suggested" phase.
However, if lockout is enabled, and the fryer still has
not been filtered after one hour, then the controller activates
lockout mode and prompts "FILTER
*MUST* FILTER NOW".
n. Press
and "SP-8E" "SKIP IF
LESS THAN..." shows in the display, followed by the
number of loads between filters, ex: "LOAD 4". In
this example, if the suggested filter time occurs, before
4 loads have been cooked, then the filter operation is
skipped. If more than 4 loads have been cooked, then
"Filter Suggested" shows in the display. The numbers
of loads can be set by pressing
o. Press
and "SP-8F" shows in the display, followed by
"LOCKOUT ENABLED?" Press
"YES" or "NO".
p. Press
and "SP-8G" shows in the display followed by
SP-8G "LOCKOUT - HEAT OIL..." and a shortening
temperature, when reached, allows the operator to filter.
Example, "LOCKOUT - HEAT OIL... 300F" means the
display shows "FILTER LOCKOUT" "WAIT", until 300F is
reached, then display shows "FILTER LOCKOUT"/"YOU
*MUST* FILTER NOW", and repeated high-low tones
are activated. This prompts the user that it is now time
to filter the shortening. Press
Model OFE- 291
and up
F1: 10.00A
F2: 2.00P
F3: 8.00P
F4:
- - - -
LOCKOUT – YOU
.
to choose
to change.
3-32
Advertisement
Table of Contents
