Table of Contents
Advertisement
3-16. SPECIAL PROGRAM
MODE (Continued)
403
Language (SP-2)
a. Follow steps 1 and 2 above.
b. Press and release
"LANGUAGE" flashes on the display, along with the
language (Ex:" 1.ENGL")
c. To toggle to the desired language, press and release
System Initialization (SP-3)
This step resets the controls, but doesn't erase product settings.
a. Follow steps 1and 2 above.
b. Press and release
SYSTEM INIT" flashes on the display, along with "INIT'.
c. Press and hold
. "INIT" shows on the display,
a tone sounds, and "IN 3", "IN 2", " IN 1" flashes on the
right side of the display. When "INIT" starts flashing on
the left side of the display, release
shows on the display, the initialization is complete, and
the controls now have factory preset parameters.
Audio Volume (SP-4)
The volume of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press
3 times. "SP-4" and "AUDIO VOLUME"
flashes on the display, along with the volume value.
c. Press
to adjust the speaker volume; 10
the maximum value and 1 the minimum.
Audio Tone (SP-5)
The tone of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press
4 times. "SP-5" and "AUDIO TONE (HZ)"
flashes on the display, along with the tone value.
c. Press
to adjust the tone of the speaker; 2000 the
maximum, 50 the minimum.
Model OFE- 291
button. "SP-2" and
twice. "SP-3" and "DO
. When " DONE"
.
3-28
Advertisement
Table of Contents
