Table of Contents
Advertisement
3-16. SPECIAL PROGRAM
MODE (Continued)
3-31
f. Press
and "SP-8C" shows in the display, if YES
was chosen in step e. "FILTER LOCKOUT AT..." and a
value between 100% and 200% shows in display. Press
to change this value.
g. Press
and "SP-8D" shows in the display, followed
by "LOCKOUT-HEAT OIL... and a temperature
(preset at 300ºF (149ºC). When a filter lockout occurs, the
fryer heats up to this set temperature, and the display shows
"FILTER LOCKOUT/WAIT". Then once the set
temperature is reached, "FILTER LOCKOUT'/ "YOU
*MUST* FILTER NOW" shows in display. Use
to change this temperature setting.
h. Now, go back to the Filter Cycle Mode step of the Pro-
gramming Section, and program in the number of Cook Cycles
between filtering.
GLOBAL
i. If "3,GLOBAL" is selected, "SP-8A" shows in the display,
and followed by "GLOBAL FILTER CYCLES". The right
side of the display shows a digit, 1 to 99. Press
set the desired amount of Cook Cycles between filters.
In Cook Mode, the number of global Cook Cycles
remaining shows in the center of the display.
Ex: "--------- 5x ----------".
j. Press
and "SP-8B" shows in the display followed
by "LOCKOUT ENABLED?" and "YES" or "NO".
Press and release
k. Press
and "SP-8D" shows in the display, followed
by "LOCKOUT-HEAT OIL... and a temperature
(preset at 300ºF (149ºC). When a filter lockout occurs, the
fryer heats up to this set temperature, and the display shows
"FILTER LOCKOUT/WAIT". Then once the set
temperature is reached, "FILTER LOCKOUT'/ "YOU
*MUST* FILTER NOW" shows in display. Use
to change this temperature setting.
l. Now, go back to the Filter Cycle Mode step of the Pro-
gramming Section. Press
shows in the display. Each product must be set to "YES" to
be included in the filter tracking.
Model OFE- 291
to choose yes or no
until "FILTER INCL"
to
1005
Advertisement
Table of Contents
