Table of Contents
Advertisement
3-15. PROGRAMMING
(Continued)
403
Change Product Names
a. Press and release
starts flashing.
b. Press and release
c. To continue to the next letter, press
to change this letter.
d. Repeat step c until up to 7 letters are entered.
e. Press and hold
release
until "PRELOAD" shows in display, to
continue with Program Mode.
5.
The Preload Mode allows the operator to drop large pieces
first, with the lid up, before loading the rest of the product.
The preload cycle always regulates to the Step 1 cook
temperature. Press
if no pre-load is desired
6.
Press and release
display along with the preset time. Press
the time. The time shows in minutes and seconds. Press and
hold the buttons, and the time will jump by 5 second
increments to a maximum of 59:59.
7.
Press and release
display, along with the preset temperature on the right side
of the display. Press
Press and hold the buttons and the temperature will jump by
5 degree increments to a max. of 380°F (193ºC), and a
min. of 190°F (88ºC).
Model OFE- 291
and the first letter, or digit,
to change the flashing letter.
. Then press
to exit Program Mode, or press and
to set a pre-load time, or press
and "1. COOK TIME" shows in the
and "1. TEMP" shows in the
to change the temperature.
to change
3-22
Advertisement
Table of Contents
