System Connections - Sharp GX-CD1300MP MK2 Operation Manual

System connections

GX-CD1300MP
MK2
ENGLISH
■
Detachable speakers
●
Set the FUNCTION switch to STAND-BY before connecting or
disconnecting the speakers.
■
Mounting the speakers to the main unit
Fit the grooves of the speaker to the guides on the main unit, and
then slide the speaker all the way down to lock it in place.
■
Removing the speakers from the main unit
Push the RELEASE lever as shown in the illustration to unlock the
speaker, and then lift up the speaker to remove it from the main unit.
E-7
■
TV/Monitor connection
If the TV/monitor has a video input, connect it to VIDEO OUT socket
on the rear of the unit.
VIDEO OUT
Note:
If the TV/monitor does not have a video input, the VIDEO OUT
socket on the unit should be connected to a VCR with a video input,
which in turn should be connected to the TV/monitor through the TV
ANTENNA/CABLE input. (Be sure to turn on the VCR, and set the
VCR's input mode to "Auxiliary".)
To video
input socket
Video cable