Sharp GX-CD1300MP MK2 Operation Manual page 16

Video CD playback (continued)
GX-CD1300MP
MK2
ENGLISH
To completely stop the video CD:
Press the ( ) button twice.
After use:
Set the FUNCTION switch to the "TAPE/STAND-BY" function to enter
the stand-by mode.
To remove the discs:
In the stop mode, press the CD EJECT button on the CD door.
Notes:
●
Playback control allows a video CD to be played back according
to instructions recorded on the disc. The "previous", "next",
"return" and "select" operations may function differently,
depending on the P.B.C. CDs.
●
Some video CDs with playback control may have an "auto pause"
recorded on them. When such a disc is played, the screen will
stop automatically at the point where an "auto pause signal" has
been inserted.
●
If the picture looks dirty when a video CD is played back, there
may be a scratch on the video CD. Replace it with another video
CD in good condition.
Caution:
●
Do not place two discs in the spindle.
●
Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
●
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
●
If a disc is damaged, dirty, or loaded upside down, the disc will not
playback. Clean, replace or reload the disc properly.
E-15
Notes:
●
Track up/track down and fast forward/fast reverse are possible
only within individual discs.
●
Operations may be different from the above in the P.B.C. mode.
●
During fast forward/fast reverse, no sound is produced. Images
may be distorted or become noisy, or discolouration may occur.
The P.B.C. function will be cancelled in the following
conditions.
When disc digest, track digest or time search play has been selected
and playback begins.
■
To move the menu screen (menu screen with
more than 1 page) (Video CD with P.B.C. only)
To move to the next menu screen:
Whilst in the menu mode, press the
To return to the previous menu screen:
Whilst in the menu mode, press the
Note:
This function may not work, depending on the disc.
( ) button.
( ) button.