Video Cd Playback - Sharp GX-CD1300MP MK2 Operation Manual

Video CD playback

Playback control:
Video CDs that support "Playback control" can display still pictures.
This function can be used with video CD software (video CDs with
playback control) that have a playback method recorded on them.
You can select items you want to watch from the menu displayed on
the TV screen, or you can show still pictures.
Turn on the TV and set the input selector to "VCR".
2 3
1
FUNCTION
1 2 3
PBC
1
4 5 6
4
7 8 9
0 +10
STOP
4
/
.
.
PROGRAM/
PAL/NTSC CLEAR OSD
2 3
DIGEST
5 6 DIRECT
AUDIO
7 8 9
MODE
PAUSE
VCD/CD
0 +10
MUTE RESUME
VCD/CD PAUSE
STOP REPEAT
VCD/CD
■
Playback control
1
Set the FUNCTION switch to CD/VCD.
2
Press the CD EJECT button to open the CD compartment.
3
Place a compact disc on the spindle, label side up.
●
8 cm (3") discs can be played without an adaptor.
●
Be sure to place 8 cm (3") discs in the middle of the disc
trays.
12 cm (5")
4
Close the CD compartment by firmly pushing the right
corner of it.
●
The unit reads the CD information.
"Cd" flashes, then "PC" will appear. Whilst "Cd" flashes, do
not press the / ( ) button. The unit may not be able to
read the CD information properly.
●
A menu will appear on the TV screen.
5
Select the desired menu number using the Direct Search
buttons on the remote control.
●
Playback will begin.
To interrupt playback:
Press the button on the remote control.
●
" " will appear in the display and "PAUSE" on the TV screen.
●
Press the / ( ) button to resume playback from the same
point.
Pause indicator
To stop the current operation and return to the menu:
Press the ( ) button once.
GX-CD1300MP
MK2
ENGLISH
8 cm (3")
E-14