System Connections - Sharp CP-BK137W Operation Manual

System connections

CD-BK137W
AM loop aerial
Surround
speaker
(Right)
Front speaker
(Right)
E-7 ENGLISH
„ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
terminal and position the FM aerial wire in the
direction where the strongest signal can be re-
ceived.
Surround
Supplied AM loop aerial:
FM aerial
speaker
Connect the AM loop aerial wire to the AM
(Left)
LOOP socket. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Front speaker
(Left)
To the wall socket
(See page 9.)
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
< Attaching to the wall >
Wall Screws (not supplied)
External
FM aerial
75 ohm
coaxial cable
01/8/28 CD-BK137W(X)E1.fm