Cd/Mp3 Playback - Sharp GX-CD1300MP MK2 Operation Manual

CD/MP3 playback

This system can also play audio CD-R and CD-RW discs, but cannot
record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
MP3 disc:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss in
sound quality.
Notes:
●
Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD (approximately 20 to 90 seconds).
●
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
●
During VBR file playback, time counter on OSD may differ from its
actual playback time.
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
■ Playing a CD/MP3
2
3
MP3 3-Digit Colour Indicator
1
FUNCTION
1
Set the FUNCTION switch to CD/VCD.
2
Press the CD EJECT button to open the CD compartment.
3
Place a compact disc on the spindle, label side up.
●
4
Close the CD compartment by firmly pushing the right
corner of it and the CD will automatically play.
●
Example : The track number is 113. (see picture)
4
Indicator (green)
/
.
.
8 cm (3") discs can be played without an adaptor.
If the track number higher than 100 up to 330 (MP3 encoded
disc), only the last 2 digit of the track number will appear in
the display following by colour indicator. The colour indicator
will appear; green (100 up to 199), red (200 up to 299), and
orange (300 up to 330).
Play indicator
GX-CD1300MP
MK2
ENGLISH
Track number
E-22