Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp GX-CD1300MP MK2 Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

GX-CD1300MP
MK2
ENGLISH
Before playback:
●
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO
recommended.)
●
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
●
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
POWER indicator
FUNCTION
TAPE1
E-27
tapes are not
2
.
.
PLAY
F FWD PAUSE
REWIND STOP/EJECT
■
TAPE 1 playback (one tape side only)
1
Set the FUNCTION switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into the
TAPE 1 cassette compartment.
3
Press the PLAY button of TAPE 1.
The POWER indicator will light up.
Fast forward/rewind:
To advance the tape, press the STOP/EJECT button, then press the
F FWD button. To rewind, press the STOP/EJECT button, then press
the REWIND button.
Notes:
●
When the end of tape is reached during the fast forward and
rewind mode, the unit will continue running in fast forward/rewind
state and the F FWD or REWIND button will not be released.
Press the STOP/EJECT button.
●
Auto stop system is only activated during playback and recording
mode.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
●
Be sure not to press the PLAY and REWIND buttons
simultaneously, or the tape will become damaged.
●
Before changing from one tape operation to another, press the
STOP/EJECT button.
●
If TAPE 1 and TAPE 2 are played simultaneously, only the sound
from TAPE 2 will be audible.
●
The TAPE 2 DIRECTION indicator refers to the travel direction for
TAPE 2 [side A(1) or side B(2)]. It is not related to the movement
of TAPE 1.