Sharp GX-CD1300MP MK2 Operation Manual page 29

POWER / TAPE 2 DIRECTION
FUNCTION
TAPE1 TAPE2
STOP/EJECT
PLAY PAUSE
■ TAPE 2 playback (both tape sides)
1
Set the FUNCTION switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into the
TAPE 2 cassette compartment.
3
Set the REVERSE MODE switch to
tape side once, or for endless repeat of the entire tape.
●
When the setting of the REVERSE MODE switch is
selected, playback always stops at the end of side B(2).
4
Press the PLAY button of TAPE 2.
●
The POWER indicator will light up.
To change the side of tape:
Press the DIRECTION switch during playback.
●
To listen to side A(1), the TAPE 2 DIRECTION "A" indicator will be
illuminated.
●
To listen to side B(2), the TAPE 2 DIRECTION "B" indicator will be
illuminated.
.
.
REVERSE
MODE
FAST DIRECTION
PLAY STOP/EJECT
to listen to each
To fast wind the tape:
Press the STOP/EJECT button, then the FAST button (
desired.
Caution:
When the end of the tape is reached during fast forward/rewind
operation, the tape will stop, but the motor will continue to rotate.
Press the STOP/EJECT button immediately.
To stop playback:
Press the STOP/EJECT button.
■
Continuous playback (TAPE 2 to TAPE 1)
1
Press the STOP/EJECT button and load cassettes into the
TAPE 1 and TAPE 2 cassette compartment.
2
Set the REVERSE MODE switch to
●
The continuous playback function will not operate when the
REVERSE MODE switch is set to
3
Press the PLAY button of TAPE 2.
4
Press the PAUSE button of TAPE 1.
5
Press the PLAY button of TAPE 1.
●
When TAPE 2 stops at the end of the tape, the PLAY button
of TAPE 2 and the PAUSE button of TAPE 1 will be
automatically released, and TAPE 1 will start playing.
6
Select side A(1) or side B(2) on TAPE 2 with the DIRECTION
switch.
●
When playback begins from side A(1) on TAPE 2, the
playback sequence will be as follows:
TAPE 2 side A(1) → side B(2) → TAPE 1 side A(1) → stop.
When playback begins from side B(2) on TAPE 2, the
playback sequence will be as follows:
TAPE 2 side B(2) → TAPE 1 side A(1) → stop.
Note:
When in the continuous play mode, pressing the STOP/EJECT
button of TAPE 2 will start TAPE 1 automatically.
GX-CD1300MP
MK2
ENGLISH
or ) as
.
.
E-28