Preparation For Video Cd Playback - Sharp CD-G10000V Operation Manual

Preparation for video CD playback

! Adjusting the TV and VCR
The TV or VCR input varies according to the connection method. Be
sure to make the settings correctly. (Then, follow the playback pro-
cedure on page 21 to check the settings.)
<For TV sets with a video input socket>
Set the input selector
to AUX.
Set the TV/VCR selector
to VCR.
<For TV sets without a video input socket>
! Selecting the video output format
Video CD is recorded in PAL or NTSC format.
Select the video output format (NTSC or PAL) according to your TV
or VCR.
To select the video output format:
Whilst in the stop mode, press the PAL/NTSC button.
Each time this button is pressed, the format will change in the fol-
lowing order:
Set the input selector
to VCR.
Notes:
" When you watch a PAL disc in the NTSC mode or an NTSC disc
TV
in the PAL mode, the vertical size of the picture will not be modi-
fied.
" If a multi-mode TV is equipped with an input selector switch, set
the switch to "MULTI MODE". For the details, refer to the TV
operation manual.
" Do not change the video output format during playback. If you do,
VCR
the picture signal may not be output properly.
" Picture may be distorted when the setting is switched. This is not
the malfunction of the unit.
" The selected NTSC or PAL mode is retained even when you turn
on/off the unit or switch functions. The mode returns to the
default if the AC power lead is left disconnected. Select a mode
again.
" Whilst playing an audio CD or MP3 disc, you cannot switch to
NTSC or PAL.
04/3/22
NTSC PAL
CD-G10000V(Z)E2.fm
TINSZA092AWZZ
CD-G10000V
CP-G10000
ENGLISH
4
E-20