Turning On The Power - Roland V-Bass Owner's Manual

After you have made preparations on your bass (GK-2B), connect your equipment as shown in the following diagram.
fig.1-01e
Mixer

Turning On the Power

Once the connections have been completed (p. 12), turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other devices.
1. Turn the POWER switch of the V-Bass to the "ON"
position to turn on the power.
The display will light, and the following screen will
appear. This is called the "Play screen."
fig.1-03
* When the power is turned on, the patch number that was
selected at the time of the last power-off will be selected.
Bass Guitar
Speaker with Amplifier
Chapter 1. Playing Sounds
Stereo Headphones
EV-5
FV-300L
etc.
Bass Amp
The various procedures described in this owner's
manual are to be performed from the Play screen, which
you can reach by pressing [EXIT] several times.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
2. Turn on the power of your audio devices (bass amp,
mixer, etc.).
To Power Outlet
FS-5U
FS-5L
etc.
13