Table of Contents
Advertisement
Specifying the function of GK VOL
* In SYSTEM menu GK FUNC, set GK VOL to
"ASSIGNABLE." (p. 38).
1. Press [PEDAL ASSIGN].
fig.2-10
fig.2-11
2. Press [F3] (ON/OFF) to the GK VOL function on/off.
fig.2-15
3. Turn the VALUE dial to select "CUSTOM" or PRESET.
4. If you wish to edit further, press [F6] (EDIT).
fig.2-16
5. Press [F1] (TARGET), and use the VALUE dial to select
the target.
* Press [F2] (NEXT GROUP) to cycle through these choices:
COSM BASS, COSM AMP, the various effects, and FX
BYPASS on/off.
6. Press [F4] (MIN), and use the VALUE dial to specify the
minimum value.
7. Press [F5] (MAX), and use the VALUE dial to specify
the maximum value.
8. If you want to save the edited settings, perform the
Write procedure (p. 30).
* If you do not want to save, press [EXIT] to return to the Play
screen.
Chapter 2. Creating sounds
Specifying the function of GK SW
* In SYSTEM menu GK FUNC, set DOWN/S1 and UP/S2 to
"ASSIGNABLE." (p. 38)
1. Press [PEDAL ASSIGN].
fig.2-10
fig.2-11
2. Press [PAGE
] to move to page 2.
fig.2-17
3. Press [F1] (ON/OFF) to switch the GK SWfunction on/off.
4. Turn the VALUE dial to select "CUSTOM" or PRESET.
5. If you wish to edit further, press [F4] (EDIT).
fig.2-18
6. Press [F1] (TARGET), and use the VALUE dial to select
the target.
* Press [F2] (NEXT GROUP) to cycle through these choices:
COSM BASS, COSM AMP, the various effects, and FX
BYPASS on/off.
7. Press [F4] (MIN), and use the VALUE dial to specify the
minimum value.
8. Press [F5] (MAX), and use the PVALUE dial to specify
the maximum value.
9. Press [F6] (MODE), and use the VALUE dial to select
the mode.
* If you set MODE to "TOGGLE," the S1 switch and S2 switch
will have the same function (p. 63).
10. If you want to save the edited settings, perform the
Write procedure (p. 30).
* If you do not want to save, press [EXIT] to return to the Play screen.
25
Advertisement
Table of Contents
