Midi - Roland V-Bass Owner's Manual

Chapter 5. Parameter guide

MIDI

Here you can make settings for MIDI-related functions.
CHANNEL
Specify the MIDI channel that will be used to transmit and
receive MIDI messages.
OMNI MODE
If this is set to "OMNI ON," messages of all MIDI channels
will be received regardless of the V-Bass's MIDI channel
setting.
DEVICE ID
Specify the device ID that will be used when transmitting
and receiving exclusive messages.
PROGRAM CHANGE OUT
Specify whether program change messages will be
transmitted when you change patch numbers on the V-Bass.
OFF Program change messages will not be transmitted
when you change patch numbers.
ON Program change messages will be transmitted when
you change patch numbers.
PC MAP SELECT (Program change map select)
Specify how the patch number will change in response to
program change messages received by the V-Bass.
FIX The default patch numbers will be selected.
PROG The patch numbers specified by the program
change map will be selected.
EXP PEDAL NUMBER (Expression pedal number)
OFF, CC#1–CC#31, CC#64–CC#95
Specify the controller number that will be used to transmit
control change messages when you operate the expression
pedal. If this is set to "OFF," control change messages will
not be transmitted.
CTL PEDAL NUMBER (Control pedal number)
OFF, CC#1–CC#31, CC#64–CC#95
Specify the controller number that will be used to transmit
control change messages when you operate the CTL pedal. If
this is set to "OFF," control change messages will not be
transmitted.
66
1–16
OMNI OFF, OMNI ON
1–32
SUB CTL 1 NUMBER
(Sub control pedal 1 number)
OFF, CC#1–CC#31, CC#64–CC#95
Specify the controller number that will be used to transmit
control change messages when you operate an external
device connected to the SUB CTL 1 jack. If this is set to
"OFF," control change messages will not be transmitted.
SUB CTL 2 NUMBER
(Sub control pedal 2 number)
OFF, CC#1–CC#31, CC#64–CC#95
Specify the controller number that will be used to transmit
control change messages when you operate an external
device connected to the SUB CTL 2 jack. If this is set to
"OFF," control change messages will not be transmitted.
PROG MAP (Program map)
When using program change messages sent from an external
MIDI device to select patch numbers, you can freely specify
the correspondence between the program change message
received by the V-Bass and the patch number that will be
selected.
BULK DUMP
This transmits data via MIDI.
START
Select the first patch to be transmitted, or System.
END
Select the last patch to be transmitted, or System.
DUMP
Begin the bulk dump.
BULK LOAD
You can receive data via MIDI.
SYSTEM, #1-1–#25-4