Table of Contents
Advertisement
Item
Mouse Speed
Key Tone
Alarm Buzzer
Alarm Relay
3.9.4 Spot Setup
In addition to the MAIN monitor output, your DVR also has a SPOT monitor output. A spot
monitor is used for public display or secondary office monitoring. Only live camera feeds
are sent to the spot monitor in a sequential manner. Functions of the DVR such as; video
being played back, menu changes, and backups in progress are not seen by people
viewing the spot monitor.
Item
Auto-Seq. Interval (Seconds)
Skip Video Loss Channel
Channels
Adjust the slider bar to your preference.
Buzzer & Relay Setup
Enable/ Disable the beep heard when pressing the front panel buttons.
Enable/ Disable the internal buzzer that can be triggered for HDD Error,
Sensor / Alarm Trigger, Motion Detection, and Video Loss.
Enable/ Disable the RELAY OUTPUTS that can be triggered for HDD
Error, Sensor / Alarm Trigger, Motion Detection, and Video Loss.
Sets the duration of each channel shown (1~999 seconds).
The spot monitor output will automatically ignore channels
without a video signal if selected.
Select which channels are to be displayed in the sequence.
48
Description
Description
Advertisement
Table of Contents
