NOTE! DO NOT TURN OFF THE POWER OR UNPLUG THE USB DEVICE DURING THE
UPGRADE as it may cause damage to the DVR.
3.11 Diagnostic
The diagnostic screen is a great way to see a snapshot of your DVR's IP and hard drive
status.
Item
Version
IP Address
MAC Address
HDD Volume
Used
HDD Status
Format Time
Shows the current firmware version of DVR
Shows the connected IP address of the DVR. If disconnected from
network, the screen will display" NETWORK DISCONNECT".
MAC Address of DVR. A hardware ID number that never changes.
The total capacity of each hard drive in your unit.
Displays the percentage of space currently used on the hard drive(s)
Shows three status indicators; USING (currently in use), GOOD (available
for use), BAD (not currently compatible for storage, please try the <HDD
Initialization> command , Utility Menu, before replacing the drive).
Displays the last date the drive was formatted using the <HDD
Initialization> command.
50
Description