Programming Your Remote Control; Setting Up Your Universal Remote Control - Zektor DVS5.1 Owner's Manual

Programming your Remote Control

Setting up your Universal Remote Control

For remote control operations, the DVS5.1 requires either a universal remote control to be pro-
grammed as one of eight pre-programmed devices. Or, alternatively, the DVS5.1 can be taught to
use most existing remote controls.
The simplest way to begin using the DVS5.1 is to program your Universal Remote control to act like
the remote used to control a Awia DVD. Once this is done you will be able to immediately start using
your DVS5.1.
Check your remote's user manual for instructions on programming your remote control.
The following table shows the Awia DVD codes for a few different brands of Universal Remote Con-
trollers:
Make
Sony
One For All
GE / RCA
Home Theater
Master
URC100
URC200
URC300
Sony
RM-AV3000
Device Code
DVD 015
DVD 0641
DVD 350
DVD 146
DVD 0015
7