Bright / Dim / Auto-Dimming Modes; Setting The Display Intensity Modes Of The Dvs5.1 - Zektor DVS5.1 Owner's Manual

Bright / Dim / Auto-dimming Modes

Setting the Display intensity modes of the DVS5.1

The front panel display of the DVS5.1 can be set to Bright, Dim or an Auto-dimming mode where
the display brightens for 4 seconds after any function is selected and then auto-dims.
Setting the mode is simply a matter of toggling between the three modes:
• Bright Mode. When pressing the S
bright and remain that way.
• Dim Mode. When pressing the S
dim and remain that way.
• Auto-dimming Mode. When pressing the S
mode, the display will turn bright, then flash to dim, then flash back to bright, indicating the
Auto-dimming mode has been selected. After 4 seconds of no activity, the display will smoothly
dim to the dim setting.
key to toggle to this state, the display will turn
D M
ET IM ODE
key to toggle to the Dim mode, the display will go
D M
ET IM ODE
D M
ET IM
13
key to toggle to the Auto-dimming
ODE