A Dvs5.1 Overview; A Description Of The Dvs5.1; Features; Your Dvs5.1 Purchase Includes - Zektor DVS5.1 Owner's Manual

A Description of the DVS5.1

The DVS5.1 is a 5 input, Digital Audio / DVI video switch.
Channel selection can be done using front panel buttons, or by using any user supplied, standard
or programmable, IR remote control.
Also available is an optional RS-232 module allowing extended control of the DVS5.1 using a stan-
dard serial port. The RS-232 module must be purchased separately.

Features

The DVS5.1 is a DVI-D only switch. This means it will pass digital video signals, but not the analog
video signals that are present with DVI-A or DVI-I. The rear panel connectors can accept any type
of cable for your convenience.
The DVS5.1 is designed to work with your HDCP encryption compliant devices. When the DVS5.1
is switched to a source with HDCP enabled encryption, the DVS5.1 will pass all the encryption com-
munications to your HDCP compliant display. If you display is not capable of HDCP, the DVS5.1
will not decrypt the video for your display. To use HDCP, both the source and your display must be
HDCP compliant. The typical results of non-compliant equipment will be total video noise, or video
snow picture, with no other picture visible.
Video inputs are capable of DVI video ranging from 480p to 1080i, plus computer modes up to
1600x1200.
Inputs 1 through 4 are capable of digital audio from SPDIF digital coax as well as Toslink optical
audio, while input 5 is limited to SPDIF digital coax only. Optical and Coax are both automatically
converted. When either input is active, digital audio is available on both types of outputs. Do not
connect both types to a single input channel or that channel will not pass digital audio.

Your DVS5.1 Purchase Includes:

• The DVS5.1.
• A 9VDC, 1.1A A.C. Adapter.
• The DVS5.1 Owners Manual.

A DVS5.1 Overview

4