Video Loss - Ness IQ User Manual

③ Select alarm outputs to be worked when Motion Event 1 is on. Please check
Select alarm outputs to be worked when Motion Event 1 is on. Please check
R1~2. More than two alarm outputs can be set. . More than two alarm outputs can be set.
④ Select E-mail addresses for notification when Motion Event 1
mail addresses for notification when Motion Event 1 is on. Please check
More than two E-mail addresses can be set. mail addresses can be set.
⑤ Repeat the above procedure for Motion Event 2~ Motion Event 16.
above procedure for Motion Event 2~ Motion Event 16.
Click ( ) By Duration box to set up the recording duration and prevent recording caused by event. By Duration box to set up the recording duration and prevent recording caused by event. By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode: RECORD>Settings>Event The duration time can be controlled by previous setting mode:
Choose 'OK' to confirm the setting.

3.6.3 Video Loss

Please click ( ) LINK>Video Loss and the following screen will appear. LINK>Video Loss and the following screen will appear.
Select alarm outputs and set up E-mail addresses for notification
Link Notification displays E-mail addresses registered in
Please follow the setup procedures below. Please follow the setup procedures below.
① Click ( ) Video Loss frame and select Video Loss 1.
Video Loss frame and select Video Loss 1.
② Select cameras for recording when Video Loss 1 is on. Please check
Select cameras for recording when Video Loss 1 is on. Please check
cameras can be set.
③ Select alarm outputs to be worked when Video Loss 1 is on. Please check
Select alarm outputs to be worked when Video Loss 1 is on. Please check
More than two alarm outputs can be set. More than two alarm outputs can be set.
④ Select E-mail addresses for notification when Video Loss 1
More than two E-mail addresses can be set. mail addresses can be set.
⑤ Repeat the above procedure for Video Loss 2~ Video Loss 16.
Repeat the above procedure for Video Loss 2~ Video Loss 16.
Click No Beep to deactivate alert sounds from video loss. Apply to all channels. to deactivate alert sounds from video loss. Apply to
Choose 'OK' to confirm the setting.
Digital Video Recorder for Ness IQ-Series
mail addresses for notification when Video Loss occurs.
mail addresses registered in DEVICES>Network>Notification.
cation when Video Loss 1 is on. Please check
Series 960H & SDI DVR
a check box under Link Alarm Out or a check box under Link Alarm Out
a check box under Link Notification. a check box under Link Notification.
a check box under Link Camera. More than two a check box under Link Camera. More than two
a check box under Link Alarm Out or R1~2. a check box under Link Alarm Out
a check box under Link Notification. a check box under Link Notification.
Page 49