Play / Pause Key - Ness IQ User Manual

Power Off
Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback) Do not turn DVR off, or plug off the power adapter while
permanent damage to the equipment. Please click ( ) SETUP>SYSTEM>Shutdown sequentially and then remove the permanent damage to the equipment. Please click
power after DVR is shut down completely. It is safe to wait for 5 seconds before turning the power on again.
Do not turn DVR off, or plug off the power adapter while External storage device (e.g., USB memory stick, removable Do not turn DVR off, or plug off the power adapter while
external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that the
power switch is in the "ON" position until data storage is completed. Please be aware that removing the storage device power switch is in the "ON" position until data storage is completed. Please be aware that removing the storage device power switch is in the "ON" position until data storage is completed. Please be aware that removing the storage device
cause the same damage to the equipment. cause the same damage to the equipment.
Do not turn DVR off, or plug off the power adapter R off, or plug off the power adapter during the format of the hard disk. Otherwise, it may cause permanent
damage to the equipment. Make sure that the power switch is in the "ON" position until the formatting of the disk is damage to the equipment. Make sure that the power switch is in the "ON" position until the formatting of the disk is damage to the equipment. Make sure that the power switch is in the "ON" position until the formatting of the disk is
completed.
HDD Installation / Addition / Moving / Replacement / Removal
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may For installation/addition/replacement/Removal of HDD (DVD
cause permanent damage to the HDD (DVD cause permanent damage to the HDD (DVD-RW).
When wish to power DVR off, please click to power DVR off, please click ( ) SETUP>SYSTEM>Shutdown sequentially and then remove the power after
DVR is shut down completely.
Installation/Addition/Moving/Replacement: Installation/Addition/Moving/Replacement: Start 'HDD initialization' including formatting. Otherwise, DVR wo
recognize the hard disk and may begin to function abnormally. Please follow the below procedure for 'HDD initialization'. recognize the hard disk and may begin to function
① (Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time).
(Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time). (Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time).
② (Initialization of system setup) All setup values are restored to original factory default settings.
(SETUP>SYSTEM>Information>Status>Setup>Default). (SETUP>SYSTEM>Information>Status>Setup>Default).
③ (HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,
) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs, ) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,
each must be formatted, separately. When the format is completed, DVR will auto-reboot. each must be formatted, separately. When the format is completed, DVR will auto
Removal: Follow the Remove procedure even when a pre the Remove procedure even when a pre-installed hard disk has been removed.
- SETUP>SYSTEM>Admin>Storage>Format, click
SETUP>SYSTEM>Admin>Storage>Format, click ( ) 'Removed' item under the discrete Format headings of a
corresponding HDD to discard 'HDD' item. When the Remove procedure is completed, corresponding HDD to discard 'HDD' item. When the Remove procedure is completed, DVR will auto
Date / Time Change
Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are
not changed.
Make sure to reboot DVR after adjusting the Date/Time. reboot DVR after adjusting the Date/Time.
Also, do not forget to execute SETUP>SYSTEM>Shutdown in sequence before reboot. execute SETUP>SYSTEM>Shutdown in sequence before reboot.
Upgrade
Do not upgrade until install a hard disk drive. Make sure Do not upgrade until install a hard disk drive. Make sure that upgrade when the hard disk drive is in proper operation.
Using a Mouse
Left mouse button: have the same function as have the same function as Enter ( ) on the Front panel of DVR.
Central button (wheel): have the same function as
Right mouse button: display a number of 'Function keys' (please see 'Input Device and Screen Icons>Using a mouse' in
this manual).

PLAY / PAUSE Key

Press the PLAY/PAUSE key to one-touch playback on the viewing screen (playback the recorded video from the last one
minute).
Every time pressing the PLAY/PAUSE key during playback mode, it is changed to '1X PLAY' and 'PAUSE'. The displayed
sign on the screen also changes from
If wish to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the PLAY/PAUSE
key first (please see if the sign II is shown on the screen).
Press the PLAY/PAUSE key to back up. Make sure that the backup is done in 'PAUSE' mode.
Camera Title
Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup
menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier. menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier.
Digital Video Recorder for Ness IQ-Series
Operation Operation Precautions
down completely. It is safe to wait for 5 seconds before turning the power on again. down completely. It is safe to wait for 5 seconds before turning the power on again.
use. Otherwise, it may cause permanent damage to the equipment. Make sure that the use. Otherwise, it may cause permanent damage to the equipment. Make sure that the
dition / Moving / Replacement / Removal
) All setup values are restored to original factory default settings. ) All setup values are restored to original factory default settings.
have the same function as Search key on the Front panel of DVR(display search menu)
display a number of 'Function keys' (please see 'Input Device and Screen Icons>Using a mouse' in display a number of 'Function keys' (please see 'Input Device and Screen Icons>Using a mouse' in
touch playback on the viewing screen (playback the recorded video from the last one touch playback on the viewing screen (playback the recorded video from the last one
key during playback mode, it is changed to '1X PLAY' and 'PAUSE'. The displayed key during playback mode, it is changed to '1X PLAY' and 'PAUSE'. The displayed
to II.
is shown on the screen).
key to back up. Make sure that the backup is done in 'PAUSE' mode. key to back up. Make sure that the backup is done in 'PAUSE' mode.
Series 960H & SDI DVR
DVR is in operation (record/playback). Otherwise, it may cause
>Shutdown sequentially and then remove the
device (e.g., USB memory stick, removable
RW), make sure that DVR is turned off. Otherwise, it may
>Shutdown sequentially and then remove the power after
abnormally. Please follow the below procedure for 'HDD initialization'.
installed hard disk has been removed.
) 'Removed' item under the discrete Format headings of a
upgrade when the hard disk drive is in proper operation.
key on the Front panel of DVR(display search menu).
. Otherwise, it may cause permanent
formatting. Otherwise, DVR would not
DVR will auto-reboot.
Page 6