Connector Wiring; Hdmi Connections - Ness IQ User Manual

1.5 Connector Wiring

1.5.1 Video-In/Loop Out Connections
Connect a camera to 'VIDEO IN'.
Assure the 'VIDEO IN' and 'LOOP OUT' connections are connected properly, not oppositely.
NOTE
Only the 16 channel 960H and 8 / 16 channel SDI 960H and 8 / 16 channel SDI supports LOOP OUT connection.
1.5.2 Monitor Connections (Video Out, VGA and Monitor Connections (Video Out, VGA and Multi Spot)
Video Out
- Use with the CCTV monitor.
- Connect BNC cable between CCTV monitor and
Connect BNC cable between CCTV monitor and 'VIDEO OUT' of the DVR.
VGA
- Use with a computer monitor.
- Connect VGA cable between computer monitor and
Multi Spot
- This function supports Multi Channel Display on Spot Monitor
This function supports Multi Channel Display on Spot Monitor
- Connect BNC cable between spot monitor and multi spot port of rear panel.
Connect BNC cable between spot monitor and multi spot port of rear panel.
CAUTION
BLACK SCREEN WILL APPEAR IF THE MONITOR DOEST NOT SUPPORT THE SELECTED RESOLUTION. CK SCREEN WILL APPEAR IF THE MONITOR DOEST NOT SUPPORT THE SELECTED RESOLUTION. UNLESS USER PRESS 'OK' CK SCREEN WILL APPEAR IF THE MONITOR DOEST NOT SUPPORT THE SELECTED RESOLUTION.
DURING BLACK SCREEN, SYSTEM WILL AUTOMATICALLY GO BACK TO THE PREVIOUS RESOLUTION IN 15 SECONDS. DURING BLACK SCREEN, SYSTEM WILL AUTOMATICALLY GO BACK TO THE PREVIOUS RESOLUTION IN 15 SECONDS. DURING BLACK SCREEN, SYSTEM WILL AUTOMATICALLY GO BACK TO THE PREVIOUS RESOLUTION IN 15 SECONDS.

1.5.3 HDMI Connections

Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device. Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device.
Please click ( ) SETUP> DISPLAY> VGA and the following screen will appear.
Click the box below to select resolution.
- User can select the resolution among '1920x1080 RB', '1920x1080', '1680x1050 RB', '1680x1050', '1280x1024', and
User can select the resolution among '1920x1080 RB', '1920x1080', '1680x1050 RB', '1680x1050', '1280x1024', and User can select the resolution among '1920x1080 RB', '1920x1080', '1680x1050 RB', '1680x1050', '1280x1024', and
'1024x768'
- The default setting of DVR is '1280 x 1024'.
Click the box below to select signal format
- User can select the signal output among '
- The default setting of DVR is
Digital Video Recorder for Ness IQ-Series
Out Connections
' connections are connected properly, not oppositely.
computer monitor and 'VGA' of the DVR
VGA and the following screen will appear.
1024'.
signal format.
among 'NTSC', 'PAL'
'AUTO'
Series 960H & SDI DVR
and 'AUTO'.
Page 12