Video Loss; System Event - Ness IQ-SDI-4 User Manual

① Click ( ) Motion Event frame and select Motion Event 1.
② Select cameras for recording when Motion Event 1 is on. Please check
two cameras can be set.
③ Select alarm outputs to be worked when Motion Event 1 is on. Please check
than two alarm outputs can be set.
④ Select E-mail addresses for notification when Motion Event 1 is on. Please check
More than two E-mail addresses can be set.
⑤ Repeat the above procedure for Motion Event 2~ Motion Event 16.
Click ( )By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode:
Choose 'OK' to confirm the setting.
4.6.3

Video Loss

Please click ( ) LINK>Video Loss
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
① Click ( ) Video Loss frame and select Video Loss 1.
② Select cameras for recording when Video Loss 1 is on. Please check
cameras can be set.
③ Select alarm outputs to be worked when Video Loss 1 is on. Please check
than two alarm outputs can be set.
④ Select E-mail addresses for notification when Video Loss 1 is on. Please check
More than two E-mail addresses can be set.
⑤ Repeat the above procedure for Video Loss 2~ Video Loss 16.
Click No Beep to deactivate alert sounds from video loss. Apply to all channels.
Choose 'OK' to confirm the setting.
4.6.4

System Event

Please click ( ) LINK>System Event
Ness IQ-SDI Users Manual
and the following screen will appear.
and the following screen will appear.
a check box under Link Camera. More than
a check box under Link Alarm Out. More
a check box under Link Notification.
RECORD>Settings>Event
a check box under Link Camera. More than two
a check box under Link Alarm Out. More
a check box under Link Notification.
47 | P a g e