3.6.1 Alarm In
Please click ( ) LINK>Alarm In and the following screen will appear.
LINK>Alarm In and the following screen will appear.
Select cameras for recording while the alarm in
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
Please follow the setup procedures below.
① Click ( ) Alarm In frame and select Alarm In 1.
Alarm In frame and select Alarm In 1.
② Select cameras for recording when Alarm In 1 is on. Please check
Select cameras for recording when Alarm In 1 is on. Please check
cameras can be set.
③ Select alarm outputs to be worked when Alarm In 1 is on. Please check
Select alarm outputs to be worked when Alarm In 1 is on. Please check
More than two alarm outputs can be set.
More than two alarm outputs can be set.
④ Select E-mail addresses for notification when Alarm In 1
mail addresses for notification when Alarm In 1 is on. Please check
than two E-mail addresses can be set.
mail addresses can be set.
⑤ Repeat the above procedure for Alarm In 2~ Alarm In 16
ve procedure for Alarm In 2~ Alarm In 16 (Up to 2 4 /8 Channels and Up to 16 for
Choose 'OK' to confirm the setting.
3.6.2 Motion Event
Please click ( ) LINK>Motion Event and the following screen will appear.
LINK>Motion Event and the following screen will appear.
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
Please follow the setup procedures below.
① Click ( ) Motion Event frame and select Motion Event 1.
② Select cameras for recording when Motion Event 1 is on. Please check
Select cameras for recording when Motion Event 1 is on. Please check
two cameras can be set.
Digital Video Recorder for Ness IQ-Series
alarm in sensor is in operation and alarm outputs and set up E
sensor is in operation and alarm outputs and set up E-mail addresses for
mail addresses registered in DEVICES>Network>Notification.
while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
while the motion sensor is in operation and alarm outputs and set up E
mail addresses registered in DEVICES>Network>Notification.
nt frame and select Motion Event 1.
Series 960H & SDI DVR
a check box under Link Camera. More than two
a check box under Link Camera. More than two
a check box under Link Alarm Out or R1~2.
a check box under Link Alarm Out
a check box under Link Notification. More
a check box under Link Notification. More
Up to 16 for 16 Channel).
a check box under Link Camera. More than
a check box under Link Camera. More than
Page 48