Start Embroidering - Brother 882-W04 Operation Manual

CREATING BOBBIN WORK (EMBROIDERY)

Start Embroidering

a
Hoop the fabric so the right side of the
fabric is facing down with the stabilizer
lying on the top. Use an embroidery frame
that fits the size of the pattern and then
attach the frame to the machine. These
patterns are embroidered from the wrong
side of the fabric so technically you are
working in "reverse" of normal
embroidering.
a Wrong side of fabric
• Always use a stabilizer material for embroidery.
Otherwise, the needle may break and cause
injuries. Not using a stabilizer material may result
in a poor finish to your project.
b
It is necessary to move to the beginning of
stitching so press
→ The embroidery frame moves to the beginning of
stitching.
c
Press
d
Press
→ The screen changes, and all keys and operation
buttons are locked.
320
CAUTION
, and then press
.
.
e
Using the presser foot lever, raise the
presser foot.
f
To bring the bobbin thread above the
fabric, rotate the handwheel
counterclockwise while holding the upper
thread.
g
As shown below, pull the upper thread to
pull the bobbin thread up through the
fabric.
a Upper thread
b Bobbin thread
.
Memo
• If the bobbin thread cannot be pulled up, use
an awl to create small hole to help pull bob-
bin thread to surface.