Restarting From The Beginning; Resuming Embroidery After Turning Off The Power - Brother 882-W04 Operation Manual

Restarting from the Beginning

a
Press .
b
Press .
→ The embroidery frame moves, returning the needle
to the pattern's beginning position.
c
Press the "Presser Foot Lifter" button to
lower the presser foot and start sewing.
ADJUSTMENTS DURING THE EMBROIDERY PROCESS
Resuming Embroidery After
Turning Off the Power
The current color and stitch number are saved
when embroidery is stopped. The next time the
machine is turned on, you have the option to
continue or delete the pattern.
Memo
• Even if the power goes out in the middle of
embroidery, the machine returns to the point
where embroidery was stopped when the
machine is turned on again.
a
a Current stitch number when embroidery was
stopped
Note
• Do not remove the embroidery unit or the
memory will no longer remember your
design.
a
Turn the main power to ON.
b
Follow the instructions shown on the screen
and remove the embroidery frame.
→ The following message will appear.
5
231