Designing A Stitch - Brother 882-W04 Operation Manual

Embroidery and sewing machine
Table of Contents

Advertisement

DESIGNING A STITCH

DESIGNING A STITCH

By using the MY CUSTOM STITCH function, you
can register stitches you have created yourself.
You can also sew designs combining MY
CUSTOM STITCH creations with built-in
characters (see page 170).
Memo
• Stitches that you create with MY CUSTOM
STITCH can be a maximum of 7 mm
(approx. 9/32 inch) wide and 37 mm
(approx. 1-1/3 inches) long.
• Stitches can be designed more easily with
MY CUSTOM STITCH if you first draw the
stitch on the included grid sheet.
a
Draw the stitch design on the grid sheet
(part code SA507, GS3:X81277-151).
Memo
• Simplify the design so that it can be sewn as
a continuous line. For a more attractive
stitch, close the design by intersecting lines.
If the design is to be repeated and linked,
the start point and end point of the design
should be at the same height.
326
b
Decide the spacing of the stitch.
*
By adjusting the spacing of a stitch, you can create
various patterns with one stitch.
c
Place points where the pattern intersects
with the grid, and connect all the points
with a line.
d
Determine the x and y coordinates of each
of the marked points.
Memo
• This will determine the stitch design that will
be sewn.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

882-w05Nv6700d

Table of Contents